Sudoku Champs Practice Test - U10 & U12 has started Discuss
Sudoku Champs Practice Test - U15 & U18 has started Discuss
Feedback / Suggestions / Questions / Thoughts / Ideas on Puzzle Expo113 posts • Page 4 of 5 • 1 2 3 4 5
@ 2023-08-29 6:22 PM (#31967 - in reply to #31709) (#31967) Top

Gotroch



Posts: 83
20202020
Country : Czech Republic

Gotroch posted @ 2023-08-29 6:22 PM

I usually solve with Number - Candidates mode. Replays doesn't show candidates at all. During solving I enter few candidates in a cell, but in replay only big digit is shown at that cell.

Edited by Gotroch 2023-08-29 6:23 PM
@ 2023-08-29 9:36 PM (#31968 - in reply to #31965) (#31968) Top

Administrator



20001000500202020
Country : India

Administrator posted @ 2023-08-29 9:36 PM

amedayke - 2023-08-28 11:13 PM

Hello. There better be an option to stop at the Puzzle Expo. Just like on the gmpuzzles site. Because when I leave the question halfway, when I return to the question later, the time does not pick up where it left off. 47 min also shows the question I solved as 7 hours.
This is the designed implementation at the moment. We are not planning to revise it, for now.
@ 2023-08-29 9:36 PM (#31969 - in reply to #31967) (#31969) Top

Administrator



20001000500202020
Country : India

Administrator posted @ 2023-08-29 9:36 PM

Gotroch - 2023-08-29 6:22 PM

I usually solve with Number - Candidates mode. Replays doesn't show candidates at all. During solving I enter few candidates in a cell, but in replay only big digit is shown at that cell.
we will have this debugged.
@ 2023-10-13 1:19 AM (#32043 - in reply to #31709) (#32043) Top

bluerobin



Posts: 1

bluerobin posted @ 2023-10-13 1:19 AM

I'm very very new on the site, and I'm finding it very difficult to understand the controls on the puzzles. Spending too much time on the controls increases the puzzle time even though I didn't do that. Can there be a tutorial version for first timers to understand the controls?
@ 2023-11-06 4:18 PM (#32094 - in reply to #31709) (#32094) Top

Realshaggy



Posts: 69
202020
Country : Germany

Realshaggy posted @ 2023-11-06 4:18 PM

In any list, ordering the puzzles by using the "size" column does weird things. My guess is, the ordering is alphanumerical using the string in the size column. Probably the number of cells should be used.
@ 2023-11-14 7:19 AM (#32103 - in reply to #32094) (#32103) Top

Administrator



20001000500202020
Country : India

Administrator posted @ 2023-11-14 7:19 AM

Realshaggy - 2023-11-06 4:18 PM

In any list, ordering the puzzles by using the "size" column does weird things. My guess is, the ordering is alphanumerical using the string in the size column. Probably the number of cells should be used.
Fixed this. Ordering is now based on "Number of Cells".
@ 2023-11-22 10:13 PM (#32112 - in reply to #31709) (#32112) Top

Realshaggy



Posts: 69
202020
Country : Germany

Realshaggy posted @ 2023-11-22 10:13 PM

Thank you, but can you please check again? It's working for the full list of puzzles now (as you can access it via the "recently published" button on the main site), but as soon as I'm setting any kind of filter (like excluding my solved puzzles or anything else), I'm still not able to order it by size.
@ 2023-12-14 10:28 PM (#32176 - in reply to #31709) (#32176) Top

RBK



Posts: 1

Country : India

RBK posted @ 2023-12-14 10:28 PM

Where can I register or get updates about the next contest
@ 2023-12-20 3:24 PM (#32187 - in reply to #31709) (#32187) Top

Realshaggy



Posts: 69
202020
Country : Germany

Realshaggy posted @ 2023-12-20 3:24 PM

Congrats%21+%F0%9F%98%81%0D%0A%0D%0Ahttps%3A%2F%2Fibb%2Eco%2FrdjGkZB
@ 2024-02-16 4:07 PM (#32387 - in reply to #31709) (#32387) Top

Gotroch



Posts: 83
20202020
Country : Czech Republic

Gotroch posted @ 2024-02-16 4:07 PM

Is there any reason why black coloured numbers are not accepted for answer checker? Usually (always?) only Green, Blue or Red colour numbers are required. Can you add black colour too? I solved some puzzles correctly with black numbers (when using Candidates mode, sometimes digits are set black as default), only to realize (usually after few minutes of searching for error) I need to rewrite them to needed colour.
@ 2024-02-16 8:50 PM (#32390 - in reply to #31709) (#32390) Top

xorevid



Posts: 1

Country : USA

xorevid posted @ 2024-02-16 8:50 PM

hi
@ 2024-02-20 12:49 AM (#32396 - in reply to #31709) (#32396) Top

sayoneyes



Posts: 1

Country : United States

sayoneyes posted @ 2024-02-20 12:49 AM

NICE
@ 2024-02-24 5:00 AM (#32410 - in reply to #31709) (#32410) Top

bakpao



Posts: 15

Country : The Netherlands

bakpao posted @ 2024-02-24 5:00 AM

Submission process gives a mismatch error when the new linedir mode is selected as preselected input. Not sure if I can upload images to posts here, please see https://i.imgur.com/qvKThHf.png
@ 2024-02-25 8:18 PM (#32413 - in reply to #32410) (#32413) Top

swaroop2011




Posts: 668
500100202020
Country : India

swaroop2011 posted @ 2024-02-25 8:18 PM

bakpao - 2024-02-24 7:00 PMSubmission process gives a mismatch error when the new linedir mode is selected as preselected input. Not sure if I can upload images to posts here, please see https://i.imgur.com/qvKThHf.png
I havent yet integrated all the main penpa_PLUS_ changes to the LMI version and so LMI version doesn't have linedir mode yet causing this error.I am currently traveling and it will be few weeks before I can align both versions. Until then I recommend using Line X mode. Sorry for the inconvenience.
@ 2024-02-25 8:19 PM (#32414 - in reply to #32387) (#32414) Top

swaroop2011




Posts: 668
500100202020
Country : India

swaroop2011 posted @ 2024-02-25 8:19 PM

Gotroch - 2024-02-17 6:07 AMIs there any reason why black coloured numbers are not accepted for answer checker? Usually (always?) only Green, Blue or Red colour numbers are required. Can you add black colour too? I solved some puzzles correctly with black numbers (when using Candidates mode, sometimes digits are set black as default), only to realize (usually after few minutes of searching for error) I need to rewrite them to needed colour.
Thank you for your feedback. I will discuss with the team and make the necessary changes in the next update.
@ 2024-02-26 4:58 AM (#32415 - in reply to #32413) (#32415) Top

bakpao



Posts: 15

Country : The Netherlands

bakpao posted @ 2024-02-26 4:58 AM

Ah that explains, thanks!

Another thing I just noticed, it seems impossible to watch replays of (test) solves by others on my puzzles still in draft. I get a "please solve the puzzle first" popup. Seems like a useful option to have for puzzles in testing.
@ 2024-03-15 4:58 PM (#32466 - in reply to #31742) (#32466) Top

nagmaKhann



Posts: 1

Country : India

nagmaKhann posted @ 2024-03-15 4:58 PM

hiii
@ 2024-03-15 5:48 PM (#32467 - in reply to #31709) (#32467) Top

Leonardo024




Posts: 18

Country : The Netherlands

Leonardo024 posted @ 2024-03-15 5:48 PM

I just had to take down a Scrabble puzzle that was having trouble understanding the answer check. I tried remaking it, this time starting to make it in LMI Expo (previously I imported a Penpa link). So, the same time occurs and I don't understand what to do about it. I tried with all colors for number, capital and small letter. Anyone has experience with solution check having difficulties with letters?
@ 2024-03-17 3:29 AM (#32471 - in reply to #32467) (#32471) Top

penpa_test



Posts: 1

Country : India

penpa_test posted @ 2024-03-17 3:29 AM

Leonardo024 - 2024-03-15 5:48 PM

I just had to take down a Scrabble puzzle that was having trouble understanding the answer check. I tried remaking it, this time starting to make it in LMI Expo (previously I imported a Penpa link). So, the same time occurs and I don't understand what to do about it. I tried with all colors for number, capital and small letter. Anyone has experience with solution check having difficulties with letters?


Can you send the puzzle link (penpa link that you tried to import), I can take a look and let you know what could be the issue. Since you don't want to reveal the puzzle publicly before uploading it to Expo, you can send it to the email penpaplus@gmail.com
I can guide you further through emails.

@ 2024-03-22 3:35 PM (#32487 - in reply to #32471) (#32487) Top

Khanzain



Posts: 3

Khanzain posted @ 2024-03-22 3:35 PM

It sounds like you're encountering a problem with the solution check feature in LMI Expo when creating a Scrabble puzzle. If the system is having trouble understanding the answer check, there are a few things you can try:

1. Check the format: Ensure that your answer format matches the expected format for Scrabble puzzles in LMI Expo. This usually involves providing the correct letters in the correct positions.

2. Verify the input method: Double-check that you're inputting the solution correctly, including any special characters or formatting required by the platform.

3. Contact support: If you've tried different formats and input methods without success, it might be helpful to reach out to LMI Expo support for assistance. They may be able to provide specific guidance or troubleshoot the issue further.

4. Seek community help: If there's a community or forum associated with LMI Expo or Scrabble puzzle creation, consider asking for help there. Other users may have encountered similar issues and can offer advice or solutions.

5. Try alternative platforms: If you continue to experience difficulties, you might explore alternative platforms or tools for creating and sharing Scrabble puzzles.

By trying these steps and seeking assistance from support or the community, you should be able to resolve the issue with the solution check feature in LMI Expo.
@ 2024-03-22 3:37 PM (#32488 - in reply to #32471) (#32488) Top

Khanzain



Posts: 3

Khanzain posted @ 2024-03-22 3:37 PM

It sounds like you're encountering a problem with the solution check feature in LMI Expo when creating a Scrabble puzzle. If the system is having trouble understanding the answer check, there are a few things you can try:

1. Check the format: Ensure that your answer format matches the expected format for Scrabble puzzles in LMI Expo. This usually involves providing the correct letters in the correct positions.

2. Verify the input method: Double-check that you're inputting the solution correctly, including any special characters or formatting required by the platform.

3. Contact support: If you've tried different formats and input methods without success, it might be helpful to reach out to LMI Expo support for assistance. They may be able to provide specific guidance or troubleshoot the issue further.

4. Seek community help: If there's a community or forum associated with LMI Expo or Scrabble puzzle creation, consider asking for help there. Other users may have encountered similar issues and can offer advice or solutions.

5. Try alternative platforms: If you continue to experience difficulties, you might explore alternative platforms or tools for creating and sharing Scrabble puzzles.

By trying these steps and seeking assistance from support or the community, you should be able to resolve the issue with the solution check feature in LMI Expo.
@ 2024-03-22 3:41 PM (#32489 - in reply to #32467) (#32489) Top

Khanzain



Posts: 3

Khanzain posted @ 2024-03-22 3:41 PM

Leonardo024 - 2024-03-15 5:48 PM

I just had to take down a Scrabble puzzle that was having trouble understanding the answer check. I tried remaking it, this time starting to make it in LMI Expo (previously I imported a Penpa link). So, the same time occurs and I don't understand what to do about it. I tried with all colors for number, capital and small letter. Anyone has experience with solution check having difficulties with letters?


It sounds like you're encountering a problem with the solution check feature in LMI Expo when creating a Scrabble puzzle. If the system is having trouble understanding the answer check, there are a few things you can try:

1. Check the format: Ensure that your answer format matches the expected format for Scrabble puzzles in LMI Expo. This usually involves providing the correct letters in the correct positions.

2. Verify the input method: Double-check that you're inputting the solution correctly, including any special characters or formatting required by the platform.

3. Contact support: If you've tried different formats and input methods without success, it might be helpful to reach out to LMI Expo support for assistance. They may be able to provide specific guidance or troubleshoot the issue further.

4. Seek community help: If there's a community or forum associated with LMI Expo or Scrabble puzzle creation, consider asking for help there. Other users may have encountered similar issues and can offer advice or solutions.

5. Try alternative platforms: If you continue to experience difficulties, you might explore alternative platforms or tools for creating and sharing Scrabble puzzles.

By trying these steps and seeking assistance from support or the community, you should be able to resolve the issue with the solution check feature in LMI Expo.
@ 2024-05-07 2:56 PM (#32682 - in reply to #31709) (#32682) Top

symbolic23



Posts: 1

Country : United States

symbolic23 posted @ 2024-05-07 2:56 PM

Hello%2C%0D%0A%0D%0AI+somehow+managed+to+obtain+a+%3E100%25+puzzle+completion+rate+just+now%2C+so+there+may+be+a+bug+in+how+that%27s+being+tracked+somewhere%2E+I+believe+at+one+point+I+solved+a+puzzle+which+was+later+taken+down%2C+which+may+be+the+cause%2C+but+I%27m+unsure%2E+Probably+not+the+worst+bug+ever%2C+but+possibly+still+worth+looking+into+%F0%9F%98%85
Feedback / Suggestions / Questions / Thoughts / Ideas on Puzzle Expo113 posts • Page 4 of 5 • 1 2 3 4 5
Jump to forum :
Search this forum
Printer friendly version