![]() | |
Posts: 6 Country : China | appetizer8088 posted @ 2015-08-04 2:58 PM 14. Division of fields Divide the grid into L-shaped regions, and their width is 1. All the circles must be always at the turning point of the L-shaped regions, and the regions with the same area cannot share the same edge. For the answer entry, enter the area of region that the labeled cell belong to. 15. Parking lot Put some 1x2 and 1x3 rectangles (representing cars) into the grid. No two cars overlap each other. Numbers in the cells represent the number of blank cells before and after the car, and it must be occupied by a car. The remaining blank cells must be connected horizontally or vertically. For the answer entry, enter the number of horizontal 1x2 cars, followed by the number of vertical 1x2 ones. 16. Four winds Draw some lines from the numbered cells so that it travels horizontally or vertically. The numbers inside some cells indicate the total lengths of lines starting from respective cells. No two lines cross each other, and no lines travel through the numbered cells. For the answer entry, enter the number of the labeled cells that the line begin with. 17. Shade it Shade some cells, leaving the other cells blank. The number and arrow indicates that the number of shaded cells in that direction, and the numbered cells cannot be shaded. For the answer entry, enter the total number of shaded cells. 18. Twin Kakuro Standard Kakuro rules apply. However, the cell in the same position of the two grids cannot contain the same digit. For the answer entry, enter the contents of the labeled cells. 19. Number block Put the given numbered blocks into the grid. All the blocks must be put on the edge of the grid (along the outer dotted lines), and the blocks cannot be rotated or reflected. Numbers outside the block indicate the sum of the respective row or column. The cells marked by "X" cannot be occupied by blocks, and the blocks cannot overlap with each other. For the answer entry, enter the sums of the labeled row or column. 20. Nanro Put the digits 1 to N (N is the size of the region) into the grid so that no two identical digits share the same edge. Also, digits inside the regions must be in a strict ascending or descending order in clockwise or anti-clockwise direction. For the answer entry, enter its contents. |