The "give up" period is set to 24 hours. That means, 24 hours after you start a puzzle, you will be able to see the replay independent of whether you have solved it or not.
May be we should reduce the "give up" period? Thoughts?

%5BQUOTE%5Ddohz+%2D+2023%2D08%2D15++8%3A29+AM%0D%0A%0D%0Abug%3A+it+appears+that%2C+when+submitting+a+puzzle%2C+the+%E2%80%9Cinfo%E2%80%9D+field+cannot+be+directly+typed+into%2E+instead%2C+text+can+only+be+pasted+into+it%2E%5B%2FQUOTE%5DFixed%2E

I think the "give up period" should be a button instead of a fixed time period. Virtually nobody I know would fail to solve a puzzle AND go back to see a replay 24h later. But everyone's general thresholds for "How much time do I solve this before I need to see a solution" would be different. It's easier to have a button so people have the choice to see replays early.

Maybe if the concern is competitiveness, the period could have a fixed minimum? Maybe like the button is disabled for the first 30m-60m after which you can press it anytime you want?

Thank you for your suggestion. We have added "Need help? View Replays" button which will be enabled 30 minutes after you start solving a puzzle. Upon confirming, you will be able to view replays. Even after clicking the button, you can continue to solve and submit the puzzle, but timing will not be displayed.

Just wanted to check that this didn't slip through the cracks. :)

Edited by Menderbug 2023-08-22 4:22 AM

It did slip under the radar, apologies for that.
For puzzles marked erroneously as "Exclusive", we encourage players to report it, so that we can fix it from the backend, if the author misses to. It certainly is a bigger problem and should be dealt separately.
Agree that there is no mechanism today for test-solved puzzles, unless you are using Expo's test solving link. We highly recommend that authors share the test solver's link, but we agree that it is not always possible. We can explore how to solve this problem, but can you also share the outcome you expect after clicking on this option? (e.g. able to rate the puzzles / view Replays OR Not showing up in "Unsolved List" OR the Most active players stats etc)? Please let us know.

I personally don't care too much whether I'd be able to vote in this situation, but it might be nice. Seeing replays, removing it from "unsolved" and adding it to the parenthesised number in player stats would be good. I mostly don't want to have to solve it again (especially with a non-representative time that an admin would have to remove).

Done!

Merhaba%2E+Puzzle+Expo%27da+durmak+i%C3%A7in+bir+se%C3%A7enek+olsa+iyi+olur%2E+T%C4%B1pk%C4%B1+gmpuzzles+sitesindeki+gibi%2E+%C3%87%C3%BCnk%C3%BC+soruyu+yar%C4%B1da+b%C4%B1rakt%C4%B1%C4%9F%C4%B1mda+daha+sonra+soruya+d%C3%B6nd%C3%BC%C4%9F%C3%BCmde+s%C3%BCre+kald%C4%B1%C4%9F%C4%B1+yerden+devam+etmiyor%2E+47+dk+da+%C3%A7%C3%B6zd%C3%BC%C4%9F%C3%BCm+soruyu+7+saat+olarak+g%C3%B6steriyor%2E

Hello. There better be an option to stop at the Puzzle Expo. Just like on the gmpuzzles site. Because when I leave the question halfway, when I return to the question later, the time does not pick up where it left off. 47 min also shows the question I solved as 7 hours.

I usually solve with Number - Candidates mode. Replays doesn't show candidates at all. During solving I enter few candidates in a cell, but in replay only big digit is shown at that cell.

Edited by Gotroch 2023-08-29 6:23 PM

This is the designed implementation at the moment. We are not planning to revise it, for now.

we will have this debugged.

I'm very very new on the site, and I'm finding it very difficult to understand the controls on the puzzles. Spending too much time on the controls increases the puzzle time even though I didn't do that. Can there be a tutorial version for first timers to understand the controls?

In any list, ordering the puzzles by using the "size" column does weird things. My guess is, the ordering is alphanumerical using the string in the size column. Probably the number of cells should be used.

Fixed this. Ordering is now based on "Number of Cells".

Thank you, but can you please check again? It's working for the full list of puzzles now (as you can access it via the "recently published" button on the main site), but as soon as I'm setting any kind of filter (like excluding my solved puzzles or anything else), I'm still not able to order it by size.

Where can I register or get updates about the next contest

Congrats%21+%F0%9F%98%81%0D%0A%0D%0Ahttps%3A%2F%2Fibb%2Eco%2FrdjGkZB

Is there any reason why black coloured numbers are not accepted for answer checker? Usually (always?) only Green, Blue or Red colour numbers are required. Can you add black colour too? I solved some puzzles correctly with black numbers (when using Candidates mode, sometimes digits are set black as default), only to realize (usually after few minutes of searching for error) I need to rewrite them to needed colour.

hi

NICE

Submission process gives a mismatch error when the new linedir mode is selected as preselected input. Not sure if I can upload images to posts here, please see https://i.imgur.com/qvKThHf.png

I havent yet integrated all the main penpa_PLUS_ changes to the LMI version and so LMI version doesn't have linedir mode yet causing this error.I am currently traveling and it will be few weeks before I can align both versions. Until then I recommend using Line X mode. Sorry for the inconvenience.

Thank you for your feedback. I will discuss with the team and make the necessary changes in the next update.